It’s that time of year, when all the manufacturers drop their new models … like this hot-rodded FZ-09 from Yamaha. |
With the big guns all having fired their loads at Milan’s EICMA show this week, we thought it would be a good time to take a look at what was released and what that tells us about the industry.
THE SMALL UNS
Since we’re all huge fans of smaller displacement rides here at CMG, the continued growth and evolution of this segment is good to see. But, it seems we’re already seeing a shift up in CCs with Honda unveiling their new CBR300 which we assume will come to Canada (though it is yet to be confirmed) and so push out the 250. You can blame the increase in size on Kawasaki, who cunningly refused to hit back at Honda in the 250 fight, instead making their own new category, the 300, with the launch of the Ninja 300 earlier this year.Obviously Honda seems to think that this is where it’s at with their CBR300 move. But, will big-boring their single-cylinder to 286 cc and changing the bodywork be enough to take on the twin Ninja? MSRP is still to be released, and we suspect that is where you’ll see the Honda attack. If they can keep MSRP difference to about $800 with performance at least close to the Ninja, then we’d have a real fight on our hands.
Here’s Honda’s CBR300, a shot over the bow of the Kawasaki Ninja 300. |
We have to wonder if the move to 300 was just the first in the sadly typical cycle of bumping up capacities, until what you thought was small is now mid-range. But with Honda already having the 500s it would seem like there’s a natural barrier, and besides, there are other players entering the fray too …
The KTM RC390 splits the difference between the 250 class and the 500 class. |
This move effectively splits the 300 and 500 class down the middle. It’s also going to add a lot of spice to smaller bikes as KTM is a dominant power in the Moto 3 (250 class) world racing series, so they know how to get a lot of power out of a small bike. Don’t expect it to be priced to compete with the CBR and Ninjas though.
Triumph introduced a few new big models, like this Commander, but they are also working on a 250. |
Yamaha’s introduced their SR400 to western markets again. |
OTHER NEW SURPRISES
If we hadn’t seen the leaks about the new Harley 500 and 750s, then they’d have stolen the show, representing the first all new bikes to come out of Milwaukee since the V-Rod hit the scene back in 2001.The new bikes are actually made in India at Harley’s new plant, only to be shipped and assembled in Milwaukee, to keep some Made in America aspect. Whether this is enough for the faithful remains to be seen, but it can be argued that these bikes are not aimed at the faithful anyway, but instead a sensible move by the Motor Company to start people off on their machines rather than try and convert them once they’ve already begun.This Hog – or is that a Piglet? – is Harley-Davidson’s first all-new model since the V-Rod. |
The new CBR650F is a return to practical sport bikes. |
If you remember the old CBR600F4, then the CBR650 will remind you of the days when 600 sport bikes had a modicum of practicality to them – somewhat comfortable seats, higher bars and rearset footpegs that are actually for the passenger, not the rider. Honda has boosted capacity a little from the old 600 and produced two versions – a sporty CBR and a semi-naked CB. Honda Canada hasn’t confirmed whether we’ll get either, but the CB would make a good replacement for the ailing CBF600 that is currently being listed on Honda Canada’s site with a hefty $2,500 discount, and the CBR is good competitor for the very similar Yamaha FZ6R and Suzuki GSX650F.
The MT-07 looks fun, but likely won’t come to Nord America. |
The new CTX1300 takes the ST1300′s motor and puts it into a cruiser chassis. |
Here’s the new Turismo Veloce. It’s got adventure-touring lines. |
No comments:
Post a Comment