Sunday, November 8, 2015

HPnineT‬



This year the BMW Hp nine-T bike design will be unveiled by BMW Motorrad Netherlands at the bikeshow at Rosmalen. BMW was surprised to hear I was already building the actual design for the BMW Soul fuel challenge myself in the garage. They were immediately enthusiastic about my other project bikes after seeing them in real life and felt confident about this build.


 

 



Wrench Kings Suzuki GS450L


“Guys!! Is the Suzuki still for sale??” That’s the question we received a couple of months after we sold the Suzuki GS450L he was referring to.
So no, the bike he was looking for was long gone. But of course we can make something that looks alike. Not exactly the same, as each bike should have its own unique features, but something similar.





Rens, that’s the guy we’re talking about. A very friendly bloke who lives at the west side of The Netherlands, the glasshouse area of Holland (you know, where you get all your beautiful red tomatoes from…).
Rens was very particular on his wishes; the triangle underneath the seat not too open and vintage blue and yellow colors on the tank. And with that basis we started.



Searching the Kingdom we found a perfect Suzuki. It required some on-the-spot maintenance to get her up and running again (old petrol and very dirty carbs), but the bike itself was in a perfect condition. No rust anywhere and hardly any mileage on the odo. A rare find in a country as wet as Holland!
We drove the bike back via country side villages and back roads, as we didn’t want to be seen on it in its original state… Kidding, it just makes for a fun drive and we had all the time of the world!



We stripped her, cleaned her, chopped everything off that wasn’t required and powder coated everything that was left over. We dare to say that the bike in its current condition is better than original (and a hell of a lot better looking!).
And driving! What a nice machine it is now!! The Tarrozi pegs are placed to fit with the new seating and this definitely adds to the handling. Flat through the corners and more than enough power to have a race feeling!
The Japanese builders boost about their original design and the road handling features already. “Because the low placement of the handle bars and the rear set foot pegs, the rider is put into a racer position when cornering” (not our words). We replaced the original high handle bars with low tracker handle bars and placed the pegs higher and more to the rear, which makes it a completely different type of bike. The old chopper is transformed to a classic racing machine now, perfectly suitable for people with average height.
The sound of the bike is typical for the air-cooled, two cylinders, four stroke engine. You’ve got to love the sound! But at the same time we managed to reduce the sound in such that you will still be able to attend the neighbour’s barbecue.


The main modifications on this bike are:
A complete blacked out look whereby really everything is powder coated.
Customized sub frame to fit the seat
A custom box underneath the seat for the ignition key and light switch
A new wiring loom whereby the visible wires in front are made of classic fabric material.
All electric components hidden underneath the seat
Clear and visible battery, purposely kept on its original location
Clean handle bars, with only a custom switch for the blinkers
Slick shorty dampers (with additional modifications to reduce the sound)
Of course a Wrench Kings paintjob on the tank
Progressive rear coils
Tarrozi foot pegs, including a custom brake and gear system
Lowered and more progressive forks
A shitload of subtle custom brackets (blinkers front and back, blinker switch, speedo, electric components, etc). And of course these are all powder coated as well.
In other words, a complete new bike! Rens needs a few weeks to recover from a busted knee, but we’re absolutely sure that he will have a blast of a time with it! Summer is coming!!












Up to the next build! We’ll keep you posted!
Pictures are taken by Bas Duijs (Facebook: @Basduijsphotography Instagram: @Basduijs). Bas is a master in portraits and film stills and with his graphic design background he has a clear eye for concept, light and detail. For more info on his work visit his website at www.basduijs.com.


First published by rocket-garage

Desert Flower: möto Dubai’s Royal Enfield Bullet


You’re more likely to spot an exotic sports car in Dubai than a classic custom motorcycle. Still, the bustling desert oasis hosts an eclectic blend of people—and a blossoming custom scene. It’s also the home of möto Dubai: a relatively young outfit that recently took top honours in the recent Bikers Cafe build-off, with this unconventional Royal Enfield.
Desert Flower: möto Dubai's Custom Royal Enfield Bullet 500
möto came together when South African Antonie Robertson and German Marco Möller connected over a Honda CB350, that the former had been working on in his apartment. “I remember Antonie showing up at my house early one day with the frame,” says Marco, “and we set about cutting off the tabs and cleaning the welds up in my front yard. I think it was a week day, and I ended up being late for work. It was total fun.”
Desert Flower: möto Dubai's Custom Royal Enfield Bullet 500
When Bikers Cafe Dubai and Royal Enfield UAE donated three Royal Enfield Bullet 500s for a build-off, the guys were invited to compete. At the same time, Marco and fellow German Frank Ortmann were in the process of setting up ‘möto space’ (a workshop and general moto-enthusiast hub), but it was far from ready. So, for three months, möto worked their day jobs and spent nights in a dusty, half-finished workshop. “It was a tough stretch,” says Marco. “Work the day job, wrench till late, sleep a couple of hours, rinse, repeat!”
Desert Flower: möto Dubai's Custom Royal Enfield Bullet 500
möto achieved a lot in those three months, reworking every aspect of the Bullet from the ground up. The bike was stripped down and the frame detabbed and redesigned. The backbone was extended, and an exquisite subframe built that now houses a recessed tail light, number plate light and turn signals. The frame was also tweaked to take the new fuel tank—a “new old stock” 70s Honda unit, sourced from the US. A panel was fabricated on top of it to house a Motogadget Motoscope Mini speedo, along with the “idiot lights.”
Desert Flower: möto Dubai's Custom Royal Enfield Bullet 500
The guys also ditched the Enfield’s EFI system and installed a Hitchcocks Motorcycles Amal carb conversion kit—allowing them to tidy up the wiring significantly. The new TCI was tucked into a custom-made housing between the swingarm and engine, and the battery moved to a new hand-made battery box. The stock, bulky ignition switch was retained though—just to keep the original Enfield-branded key in use. The engine’s exterior received a significant refresh too, with the fins being hand filed to a perfect edge, painted and polished again. The unsightly starter motor was hidden behind a hand-shaped cover, before Marco spent the better part of sixty hours engraving various bits. A stunning, stainless-steel exhaust was welded up to top it off.
Desert Flower: möto Dubai's Custom Royal Enfield Bullet 500
A Royal Enfield Electra front-end was fitted to give the bike a more scrambler feel, while keeping things brand-focussed. It’s matched to a set of new rear shocks from Dime City Cycles. The wheels are new too: they’re a pair of 18” Excel rims, laced up with stainless spokes by Buchanan’s in California and wrapped in Shinko rubber. möto polished up the hubs before sending them over, then polished the rims afterwards for a mixed, gloss-and-matte finish. Up front, the original, boxy rear license plate mount was re-purposed to house the headlight and front turn signals. The cockpit’s finished off with refurbished Honda CB350 controls, internal wiring, Biltwell grips and a Nissin master cylinder with a Goodridge braided brake line.
Desert Flower: möto Dubai's Custom Royal Enfield Bullet 500
When it came to the last few parts, Marco and Antonie’s attention to detail began bordering on obsessive. The rear wheel hugger is a completely custom affair, the foot controls consist of off-road parts welded to the stock mounts, and there’s even a hand-made bash guard, mounted on extended engine mount brackets. And if you look really closely, you’ll notice various bolts, caps and bushes—each machined from either aluminum or stainless steel, and each serving a specific purpose. The final piece of the puzzle is the one-off seat—upholstered in locally-sourced camel leather.
Desert Flower: möto Dubai's Custom Royal Enfield Bullet 500
It’s no surprise that möto took first place in the build-off, but Antonie and Marco’s pride in their project runs deeper than just a trophy. On the left hand side of the engine, the Royal Enfield now carries the initials “NSK”—a tribute to Nelson Suresh Kumar. “Nelson was the Godfather of the UAE Royal Enfield scene,” explains Antonie, “and sadly passed away unexpectedly two years ago. He was a close friend to the growing alternative motorcycling scene in Dubai, and is widely missed by all who knew him.”
Desert Flower: möto Dubai's Custom Royal Enfield Bullet 500
möto’s ‘NSK’ is fitting homage, and a worthy winner. Pat yourselves on the back, gentlemen. Antonie and Marco would like to extend their thanks to the Dubai community who supported them, particularly Djalal from Gecko Motorcycles and Frank Ortman.
Follow möto Dubai on Facebook | Instagram | Photos by Antonie Robertson
Desert Flower: möto Dubai's Custom Royal Enfield Bullet 500
First published on bikeexif.com

Monday, October 19, 2015

Big Bad Wolf: El Solitario’s Yard Built XJR1300


It takes a brave man to commission a bike from El Solitario: founder David Loner Borras is famed for his wayward, mischievous intelligence. And his small crew of Galician ‘cannibals,’ as they describe themselves, build bikes that incite controversy. Two years ago, El Solitario wrapped a BMW R nineT in stainless steel rods, creating the world’s first ‘Bōsōzoku-Chopper-Racer.’ The reaction from the interwebs was intense, to say the least. But that didn’t stop Yamaha Europe product manager Shun Miyazawa from knocking on Borras’ door earlier this year.

Miyazawa wanted El Solitario to oversee the final Yard Built XJR1300 of 2015, celebrating 20 years of the iconic street machine. The result is a race-inspired track monster that lives up to its name, ‘Big Bad Wolf.’

BBW broke cover for the first time at the Glemseck 101 festival in Germany last month, lining up on the drag strip. The goal: to end the reign of defending sprint champion Séb Lorentz and his famous Lucky Cat Garage Sprintbeemer.

Despite the transition from street machine to pure race bike, El Solitario stayed true to the Yard Built ethos: there’s no frame cutting or welding on Big Bad Wolf. But that didn’t make the project easy. “El Solitario is not familiar with 4-cylinder bikes,” says David Borras. “For months we tried to answer the question: How could we take it further?”

The only answer was to focus on performance and technology. “Both were unknown and expensive paths for us. We are motorcycle poets, not engineers.” Borras pulled together a tight-knit crew of specialists to work with his mechanics, led by Mauro Abbadini of Madrid-based Classic Co. “As technical director of the build, he brought with him the confidence and know-how of a veteran racer.”

The frame, tank and bars were left alone, but almost everything else on this XJR1300 is custom made. Wet weight is down by a whopping 25 per cent, from 245 kilos to 183 kilos (403 pounds). The motor was blueprinted, and the heads ported and flowed—the intake port flow is up by 50%. Compression is up too, from 9.7:1 to 10.7:1. The combustion chambers have been reshaped and the squish areas increased. The rods were reinforced with titanium bolts and the crankshaft was rebalanced.

Fuel is now metered by state-of-the-art Lectron 42 carburetors, developed specifically for the XJR1300 on Lectron’s flow bench, and a Dynatek programmable ignition handles the spark. This XJR1300 now records 148 hp at the rear wheel, which lifts the power-to-weight ratio into sportbike territory. The Big Bad Wolf sits somewhere between the BMW S1000 RR and the Ducati 1299 Panigale. There’s a smattering of carbon fiber. It’s present in the tail section and belly pan fabricated by Classic Co., and in the Dymag wheels—which fit not only the BBW, but also a stock XJR1300.

For the metalworking, El Solitario sent their designs to Acke Rising of ISR in Sweden. He’s turned out beautiful triple trees, disc rotors and an exquisite rear brake caliper bracket. As a bonus, Acke popped a few more ISR parts into the return mail package, including hand controls and brake calipers—six pistons at the front, and four pistons at the back.

The forks and shocks are just as trick, being a joint effort from K-Tech Suspension and Novatech. For the exhaust system, El Solitario turned to Asahina Racing in Japan, who fabricated a custom titanium number. If you’ve got an XJR1300 in your own garage and a few readies to spend, you’ll be glad to know it’ll fit a stock XJR1300 too.

After putting so much work into the engine, it was critical to keep it cool. Taleo Racing of Madrid created the semi-circular oil cooler, using the same technology they supply to MotoGP teams. Then EMD of France machined a set of aluminum motor covers (which XJR1300 owners will soon be able to add to their shopping lists too). A TWM custom gas cap sets off the tank, and an aluminum swingarm and rearsets from Over Racing finish off the rear. Electrics are routed through a Motogadget m-Unit, activated by a digital ignition m-Lock with remote RFID tech.

El Solitario bikes always have a huge visual impact, but the Wolf introduces a new element of style and restraint. We love the slender geometrical pinstriping—the work of London artist Death Spray Custom. It’s a new approach for David Borras and crew, and they’ve nailed it at first attempt. “The timing was just right,” Miyazawa says. “We believed they were ready to push out in a new direction and break new ground.”
“We wanted to challenge them to show a different side to El Solitario.”

An even bigger challenge came at Glemseck, in the race to unseat Séb Lorentz’s all-conquering Sprintbeemer. The latest version of that machine, you may remember, has race-spec internals in its R100RS motor and a NOS system. With Mauro Abbadini on board, the Big Bad Wolf destroyed all-comers in the heats and finally faced up against the mighty Sprintbeemer. Everything was going to plan. Then disaster struck—but for the Sprintbeemer, which blew its ignition on the start line.

An interlude was agreed to allow Lorentz time to repair his BMW. Then the bikes lined up again … and The Big Bad Wolf killed the Lucky Cat. But we can’t imagine the friendly rivalry between Lorentz and Borras will die down. After all, cats have nine lives. Here’s to next year, and a rematch between these two magnificent machines.

First published by www.bikeexif.com/

Sunday, October 18, 2015

Yamaha SR500 By Soyouz Cycles

Based in Toulouse, France, Philippe builds bikes as Soyouz Cycles—an after-hours hobby which he describes as “just a bunch of friends sharing a garage.” And while his build might tick all the wrong boxes for some folks, we dig it for reasons that we can’t explain.


Aiming for a minimal, bobbed vibe, Philippe set about stripping off as much as he could from the frame—in the process cutting-and-looping the tail. He also rebuilt and shortened the forks, and fitted shorter  shocks, dropping the ride height by roughly four inches
The fuel tank’s off a different XS650 model, similar in shape to the SR500 of the time. Philippe ‘aged’ it using a chemical mix. The seat’s custom, upholstered by the girls of the Soyouz Cycles crew.

Follow Soyouz Cycles on Instagram | With special thanks to François from Self Moto Service and the Soyouz Cycles crew.